CPF'ers,
We are pleased to announce a new flashlight from JETBeam.
The Jet-III-M (Military/LE Series).
Here are some of the details:
Specially designed for Military and Law Enforcement.
Simple and convenient UI, two modes can be switched easily
User-defined mode provides various brightness levels and different functions.
Infinitely variable brightness system, no more traditional restrictions of preset birhgtness levels.
Both the flashlight head and tail use stainless steel retaining bezels, which prevent damage from impacts due to dropping the flashlight, etc.
The crenulated stainless steel tail can be used for glass breaking whenever needed.
The two-way clip on the flashlight acts as an anti-roll feature, and can be conveniently disassembled from the light as well.
The light output reaches 225 lumens, and effective lighting distance exceeds 200 meters
The latest generation circuit is designed to maximize efficiency and a broad voltage range, which is compatible with CR123 batteries and rechargeable lithium batteries (including 18650 lithium batteries)
Extended runtime, lasts continuously for more than 200 hours.
Waterproof accords IPX 8 standard
Resistance to impact by dropping according to US MIL-STD-810F standard.
Remote switch and Weapon mount (optional accessories)
Specs:
Model: JET-III M
LED: CREE 7090 XR-E (Q5 bin)
Max Output: 225 Lumen (Torch Lumen)
Reflector: aluminum reflector
Lens: Sapphire crystal
Material: T6061 T6 aircraft aluminum alloy,
Finish: HA III Military grade hard annodized
Battery: CR123*2,RCR123*2,18650 Li-ion
Input voltage: 2.7-15V
Switch: Forward clickie switch
Waterproof: Accord to IPX-8 standard
Dimension: Bezel diameter 33mm, Tail diameter 24mm, Overall length 130mm
Weight: 118g
Patented Product.
Output & Runtime:
MAX output
CR123*2: 225Lumen, 2Hours
RCR123*2: 225Lumen, 1Hours
18650*1: 225Lumen, 3Hours
Min Output: 2 Lumen, lasting for 200 hours
Instructions for new Jet-III "Military" series UI:
Mode Switching
There are two modes on the JETBeam M series flashlights—Max brightness and User-Defined Mode. Users can switch the modes quickly by tightening/loosening the head.
When head is tightened simply click on the light for max brightness; when head is loosened, click on to enter user-defined mode(mode that you programmed to be your second mode ie: strobe, 2 lumen, 50% of max, etc). User can define the infinite brightness levels and strobe functions under this user-defined mode.
User-defined mode setting
Under user-defined mode, switch off/on for three times or more within one second, the light enters Hidden Menu.
Tips: UI is designed to avoid accidental activation of the programmable menu. It is suggested that user half press the button at the tail cap three times or more, and then fully click the tail cap button to enter the programming menu.
Brightness Setting
After entering the Programming Menu, the light goes into the Brightness Setting directly. Under this menu, the brightness will go from Min to Max gradually, and stops at Max, then go back to Min and repeat the process, one cycle takes about 8 seconds. During this process, the light flickers once at Min, and twice at 50% output; and three times at Max (100%) to remind users the current brightness level. Users can switch off the light at any level you prefer, wait for more than 2 seconds to switch on, then the brightness you chose will be memorized as the user-defined mode. Users can set different brightness levels according to preference.
The light does have a true momentary mode by half pressing the tail cap button or click down fully for constant mode.
More pics just posted in post # 49
Regards,
Flavio
BugoutGearUSA.com
JETBeam Military/LE Series...In Stock
Linear Mode
