Thanks for the info. I thought primaries have the same voltage as Li-ion, not LiFePO4 @ 3.6. But if a Li-ion peak charges @ 4.2v then I see what you're saying.
Thanks for the info. I thought primaries have the same voltage as Li-ion, not LiFePO4 @ 3.6. But if a Li-ion peak charges @ 4.2v then I see what you're saying.
http://www.amazon.com/Saft-LS-14500-.../dp/B002GK406C I'm new to the rechargeable scene, but Amazon list these as 3.6v, are these any good and are the specs legit?
No those will not work. They are li-socl2 cells, designed for very very low currents like <10mA. They are very high energy density and have a long shelf life, and are designed for smoke detectors, alarm systems and other similar devices that draw a low amount of power but need a long reliable service life.
Hi sir, do you accept international delivery? I'm from Southeast Asia and planning on getting an E03 neutral white..
Hi, I ship worldwide and you can order through www.edcplus.com. Thanks.
For anyone who's curious, I bought one of these lights modded by Vinhguyen here- on one 14500 IMR, this light is nothing short of spectacular! All he did was change the emitter and driver to a U2 and up the amps a bit. Thus configured, its hits well over 500 OTF lumens. These lights are VERY similar to what I have- GET ONE, you will NOT be disappointed!!
More E03's shipped out, thanks!![]()
Paypal sent for order # 144! Thanks and looking forward to getting my E03 & some lanyards.
More E03's shipped!![]()
i placed an order for my fourth or fifth E03 last night
they really make awesome gifts and personal lights, of course.
WW, Red.![]()
Looking for: MC-E Malkoff modules and/or Surefire Kroma MILSPEC.
More E03's shipped out today, Thanks!![]()
Where does the Xeno E03 go from here?
Is the Cree xt-e in the works, because that should have the throw potential of the xp-e with the output of the xp-g, right?
Hi Jason,
When you get the chance, please respond to my PM. Tnx!
Cheers,
Joey
XT-E is slightly more efficient than the XM-L at low dive currents <500mA, but the XM-L does better at higher currents. I have a modded E03 with Blue XT-E installed, but if I can get a white XT-E on MPCB maybe I'll try it. I hear the beam of the XT-E is a little funky.
Responded to your PM.![]()
Even if the reflector needs heavier stippling [to compensate for the 'funkiness'], the much smaller size of the xt-e relative to the xm-l should bring back the throw.
I feel the like there is a pendulum swinging back/forth, and now it is time to swing back to throw.
Maybe different anodization colors too.
Several E03 orders shipped out today.![]()
Have this for a few months now still going strong with no problems.
any recommendations for a pocket clip?
Recent Reviews: | Blackshadow Terminator | ArmyTek Barracuda | Crelant V21A, 7G5CS U3 | Niteye EYE10 TIC |
List of Reviews | Like
Has anyone had any issues with the light not always turning on? About 50% of the time I have to knock the light after clicking to get the light to come on. Haven't abused it by any means. No submersion, no hard hits, it's only been on my key chain since I bought it. Never mounted to a weapon or anything like that.
Does this work with protected cells or are they too long? Tried a protected cell in another flashlight and the screw down to contact head mechanism would not function with the longer cell.
Recent Reviews: | Blackshadow Terminator | ArmyTek Barracuda | Crelant V21A, 7G5CS U3 | Niteye EYE10 TIC |
List of Reviews | Like
More E03's shipped. Thanks!![]()
Mine came in by mail today! It took longer than expected but the wait was worth it, considering my location plus the clunky mail/customs system in my area. I like the NW tint better than my CW E03 but both of them are definitely keepers! Thanks again!
Bookmarks