AW's LiIon Batteries Sales Thread *Part 12*

[AW]

*
*
*
Quality Batteries By AW with a Proven Safety and Reliability Track Record Since 2005





Part 11




The original thread is getting too big so I 'll re-organize here :


__________________________________________________ __________________________________________________ _______________________________________________


AW P18650 -31

- Built with these LiNiCoO2 NNP cells.

- Three triangulated raised dots ensure solid cell to cell connection when used in series.

- PCB protection against overcharge/ over discharge / short circuit.

- Safety vent with thermal cut off protection.

- Heat Resistance Layer (HRL) technology that forms an insulating metal oxide layer between the positive and negative electrodes. The layer prevents the battery from overheating even if a short circuit occurs.

- Featuring a new polyimide insulated ultra thin (0.09mm) pcb connecting flexi strip that is heat resistant to 500F ( instead of a bare metal strip ). This new polyimide insulated flexi strip will protect the battery from a direct short in case the outer plastic wrapper of the battery is torn / damage. The new design also makes these 3100 the slimmest protected 18650-3100 available.



SPECIFICATIONS:

Nominal Voltage : 3.6V
Capacity : 3100mAH ( rated at 0.2C discharge 4.2V - 2.5V @ 25℃ )
Operating Temp. : Charge 0 to 45℃ / Discharge -20 to 60 ℃
Recommended Charge Rate : max. 2170mA ( 0.7C ) - ambient temp. 25 ℃
Max. Discharge Rate : 6.2A ( ambient temp. 25 ℃ )
Dimensions :18.50 X 68.16mm ( +/- 0.3mm )


Price : $19.75 each







__________________________________________________ __________________________________________________ _______________________________________________



AW P18650 -29

- Built with these LiNiCoO2 NNP cells.

- Three triangulated raised dots ensure solid cell to cell connection when used in series.

- PCB protection against overcharge/ over discharge / short circuit.

- Safety vent with thermal cut off protection.

- Heat Resistance Layer (HRL) technology that forms an insulating metal oxide layer between the positive and negative electrodes. The layer prevents the battery from overheating even if a short circuit occurs.


SPECIFICATIONS:

Nominal Voltage : 3.6V
Capacity : 2900mAH ( rated at 0.2C discharge 4.2V - 2.5V @ 25℃ )
Operating Temp. : Charge 0 to 45℃ / Discharge -20 to 60 ℃
Recommended Charge Rate : max. 1925mA ( 0.7C ) - ambient temp. 25 ℃
Max. Discharge Rate : 5.8A ( ambient temp. 25 ℃ )
Dimensions :18.52 X 68.16mm ( +/- 0.3mm )


Price : $17.75 each









__________________________________________________ __________________________________________________ _______________________________________________


AW P18650 -26

Designed for incan lamps and high power LEDs. Good performance even under 3A - 5A draw.

- Powers up a WA1185/1111 with a single click.

- Three triangulated raised dots ensure solid cell to cell connection when used in series.

- PCB protection against overcharge/ over discharge / short circuit.

- Safety vent with thermal cut off protection.


SPECIFICATIONS:

Nominal Voltage : 3.7V
Capacity : 2600mAH ( rated at 0.2C discharge 4.2V - 2.8V @ 25℃ )
Operating Temp. : Charge 0 to 45℃ / Discharge -20 to 60 ℃
Max. Charge Rate : 2.6A ( ambient temp. 25 ℃ )
Max. Discharge Rate : 5.2A ( ambient temp. 25 ℃ )
Dimensions :18.52 X 68.16mm ( +/- 0.3mm )


Price : $14.75 each





__________________________________________________ __________________________________________________ _______________________________________________



Protected Batteries
===================================

- Protected 18650 ( 2200mAH ) ---- $12.00 each *Upgraded *Button Top Cell
- Protected 18500 ( 1500mAH ) ---- $10.00 each *Upgraded *Button Top Cell
- Protected 17670 ( 1600mAH ) ---- $10.00 each *Upgraded *Button Top Cell
- Protected 17500 ( 1100mAH ) ---- $10.00 each
- Protected 14500 ( 750 mAH ) ----- $ 9.00 each
- Protected R123A ( 750 mAH ) ----- $ 6.00 each Details


Size measurements :

P18650-22 - 18.30 x 67.60mm ( +/-0.05 )
P18500 ----- 18.45 x 51.33mm ( +/-0.05 )
P17670 ----- 17.02 x 67.30mm ( +/-0.05 )
P17500 ----- 17.00 x 51.33mm ( +/-0.05 )
P14500 ----- 14.33 x 51.33mm ( +/-0.05 )



***All the above protected cells have Anti-explosion Vent / PTC ( mechanical thermal protection ) in addition to the electronic PCB protection circuit with parts made in the USA and Japan..


Shipping is $5.00 ( up to six batteries, additional cells $0.50 each ) . Registered mail w/ tracking is $3 extra. If you choose this option when your package is lost or gone missing, I 'll simply replace your order ( after 30 days )and it 'll be me to deal with the Post Office. Otherwise, I 'll not be responsible for lost packages during transit. Please DO NOT ask me for a tracking no. if you don't opt for the registered mail because no tracking is available for regular air mail.



Size Reference :

18650 = 168A / 600P
17670 = 168S / 600S
18500 = 150A / 300P
17500 = 150S / 300S
14500 = AA
16340 = CR123






*** Please note there are current threshold limitations set by the protection PCBs in the above batteries, some may not work in high current draw incan lights. Please check whether they 'll fit your specific applications before ordering.



*** IMR16340 ...............$6.00 each. Shipping $5.00 ( up to six cells ).

*** IMR14500 ................$6.50 each. Shipping $5.00 ( up to six cells ).

*** IMR18350 .................$7.50 each. Shipping $5.00 ( up to six cells )

*** IMR18490 .................$8.50 each. Shipping $5.00 ( up to six cells ).

*** IMR18650-1600 ........$9.50 each. Shipping $5.00 ( up to six cells ).

*** IMR18650-2000 ........$10.50 each. Shipping $5.00 ( up to six cells ).



*** LiFePO4 R123 $6.00 each. Shipping $5.00 up to 6 cells.



Unprotected Batteries
==================================


- 18650 ( 2200mAH ) ---- $6.50 each * Out of Stock
- 18500 ( 1400mAH ) ---- $5.50 each * Out of Stock
- 17670 ( 1500mAH ) ---- $5.50 each
- 18490 ( 1350mAH ) ---- $5.50 each * Out of Stock
- 17500 ( 1100mAH ) ---- $5.50 each * Out of Stock
- 14500 ( 700mAH ) ----- $4.50 each * Out of Stock


*** All with PTC built-in for thermal protection

Shipping is $5.00 ( up to six batteries, additional cells $0.50 each )


================================================



- 15266 ( RCR2 ) 350mAH ---------- $4.50 each
- 10440 ( AAA ) 350mAH ----------- $4.00 each * Out of Stock
- 14250 ( 300 mAH ) 1/2AA -------- $4.50 each
- 10280 ( 180 mAH ) ---------------- $4.50 each
- 10180 ( 90mAH ) ------------------ $4.50 each

* Shipping is $2.50 ( for up to 4 batteries )
================================================


- Spacers for charging RCR2/14270/10280 is $1.75 each with battery purchase

- Dummy CR123 / AA $5.00 each shipped




Warranty : All batteries sold are covered by a 90 day warranty from the date of purchase. Please keep the voltage of all LiIon batteries above 3.8V for healthy storage. Recharge as soon as possible when you have run them down. Storing a depleted ( less than 3.6V open voltage ) battery may damage/ shorten life/cycle permanently.


LiIon Battery Charge Status

4.2V – 100%
4.1V – 87%
4.0V – 75%
3.9V – 55%
3.8V – 30%
3.5V – 0%







The new Protected 17670 (1600mAH), 17500 (1100mAH), 14500 (750mAH) are now available. A few improvements have been incorporated on these new cells :

- a new protection PCB with a higher current threshold ( up to 5A +/- 0.5A );

- a removeable sticker label to reduce overall diameter;

- button tops on 17670 and 17500 for better contact without the need for spacers ;

- steel bottom plate for better wear protection from tailcap springs;





***DO NOT USE LiIon batteries if you don't know the dangers about them and how to handle them. Please check out this resourceful website on handling, charging, storage of LiIon batteries. Use at your own risk***










================================================


PP address : awwan01@yahoo.com. Please note I 'll only ship to the registered address shown in the
PayPal payment. Make sure your address is up to date when sending payment.




~ New orders will be shipped after the CNY holidays on 20th ~




*** Please PM / Email if you have questions.

**** Always exercise caution when using / handling LiIon batteries.



Charger Reference Guide


----------------------------- Charger:
----------------------------- Nano-123 --- Nano-AAA --- DSD ---------- UF WF-138 --- UF WF-139
--- [charging bays] --------> 1 ---------- 1 ---------- 2 ------------ 2 ----------- 2
--- [charging channels] ----> 1 ---------- 1 ---------- 1 ------------ 2 ----------- 2
--- [current per channel] --> [~150mA] --- [~150mA] --- [350mA+](6) -- [250mA](7) -- [450mA](8)
-
- Battery: ------------------
- Prot. 14500 ( 750 mAH ) --- yes(2) ----- yes(2) ----- yes(1) ------- yes(2) ------ yes
- Prot. R123A ( 750 mAH ) --- yes -------- yes(2) ----- yes ---------- yes --------- yes(1)
-
- 18650 ( 2200mAH ) --------- yes(2,3) --- yes(2,3) --- yes ---------- yes(2,3) ---- yes
- 17670 ( 1500mAH ) --------- yes(2,3) --- yes(2,3) --- yes ---------- yes(2,3) ---- yes
- 18490 ( 1350mAH ) --------- yes(2,3) --- yes(2,3) --- yes(1) ------- yes(2,3) ---- yes
- 17500 ( 1100mAH ) --------- yes(2,3) --- yes(2,3) --- yes(1) ------- yes(2) ------ yes
- 14650 ( 1000mAH ) --------- yes(2,3) --- yes(2,3) --- yes ---------- yes(2) ------ yes
- 14500 ( 700mAH ) ---------- yes(2) ----- yes(2) ----- yes(1) ------- yes(2) ------ yes
-
- MP R123 ( 700mAH ) -------- yes -------- yes(2) ----- yes ---------- yes --------- yes(1)
- 15266 ( 300mAH ) RCR2------ yes(1) ----- yes(2) ----- no(4) -------- yes(1) ------ no(4)
- 10440 ( 320 mAH ) AAA------ yes(2) ----- yes -------- no(4) -------- yes(2) ------ no(4)
- 14270 ( 310 mAH ) --------- yes(1) ----- yes(2) ----- no(4) -------- yes(1) ------ no(4)
- 14250 ( 300 mAH ) 1/2AA---- yes(1) ----- yes(2) ----- no(4) -------- yes(1) ------ no(4)
- 10280 ( 180 mAH ) --(9)---- yes(1) ----- yes(1) ----- no(4) -------- no(4) ------- no(4)
-
- 10220 ( 100 mAH ) 1/2AAA--- included for reference only
- 10180 ( 90 mAH ) 2/5AAA---- included for reference only (use 10-20mA coin cell charger)
-
Notes:
(1) yes, with spacer
(2) yes, with adaptor (such as wires with alligator clips)
(3) yes, but it will take a long time due to low charging current
(4) no, charging current is too high
(5) only in pairs, otherwise charging current may be too high
(6) only one charging channel, so the charging current will be split when it charges two cells at once (see note 5); the DSD charging current depends on the 'wall wart' transformer that is used, the normal stock unit seems to be 350-400mA but some people have used transformers with higher current ratings
(7) dual independent channels, so if two cells are charged they will both see the rated charging current; the UltraFire WF-138 charging current is 250mA per channel; an Additional Feature of the WF-138 is a 4.2V / 3.6V selector for charging 3.7V or 3.0V LiIon cells ( the recessed switch is designed so you won't accidentially move the setting, you'll have to use a paper clip to change the setting manually )
(8) dual independent channels, so if two cells are charged they will both see the rated charging current; the UltraFire WF-139 charging current is 450mA per channel
(9) The 10280 cell is a shortened AAA cell that has the diameter of an AAA cell but the length of an N cell
__________________

[Goldy]

Hi AW,

Payment sent for :
- 4x *** NEW AW P18650 -26
- 4x Protected 14500 ( 750 mAH )
- 1x Protected R123A ( 750 mAH )
Shipping and Tracking
TOTAL $ 94,75
Thanks

[MTL-TL]

Do you ship to Canada for that price ?

[AW]

MTL-TL,

Yes.

AW

[AW]

cat.shannon,
arnoldr,
Goldy,

Orders shipped. Thanks!

AW

[dcaprilia]

I would like to order the following:
　
2Pcs - AW P18650 - 26 SPECIFICATIONS:

Nominal Voltage : 3.7V
Capacity : 2600mAH ( rated at 0.2C discharge 4.2V - 2.8V @ 25℃ )
Operating Temp. : Charge 0 to 45℃ / Discharge -20 to 60 ℃
Max. Charge Rate : 2.6A ( ambient temp. 25 ℃ )
Max. Discharge Rate : 5.2A ( ambient temp. 25 ℃ )
Dimensions :18.52 X 68.16mm ( +/- 0.3mm )


Price : $14.75 each ($29.50)
　
2 pcs - Protected 18500 ( 1500mAH ) ---- $10.00 each ($20) *Upgraded New *Button Top Cell ( The Only Protected cell powers up the WA1185 )
2pcs- Protected 17670 ( 1600mAH ) ---- $10.00 each ($20) *Upgraded New *Button Top Cell

2pcs - Protected 14500 ( 750 mAH ) ----- $ 9.00 each ($18) *New Cell *
4pcs - Protected R123A ( 750 mAH ) ----- $ 6.00 each ($24) *New Cell

12 pcs $111.5
Plus shipping $7.50
Total $119


Paypal sent

[ninemm]

Ordering the following:
1x Protected 18650 (2200)
2x IMR 16340
2x CR123 Dummy Cells for charging
Plus 4.50 shipping

Total= $38.50

Paypal sent!

[AW]

dcaprilia,

Order shipped.

Thanks!
AW

[klorsaw]

I'm confused,are the 18650 AW 2600 mAh a protected cell or not?It looks like a protected cell from the summary you provided but everyone seems to be specifically avoiding calling it a Protected cell.What gives?

~~~~~~~~~~~~~~~~~~~~

Do you ship to Australia (3044 Postcode) and if so how much would shipping cost for:

3x AW P18650 2600mAh

[AW]

Hi klorsaw

3x AW P18650 2600mAh $44.25
regular shipping $4.50
Total $48.75 USD


AW

[mauriciopeppino]

AW,
I am ordering the following:

6x Protected 17670 ( 1600mAH ) 60usd
2x Protected 18650 ( 2200mAH ) 24usd
+ 5,5 shipping + 3 Reg. Mail

Total:92,5 USD.

[MeLLoJeLLo]

Hi AW,

I would like to know where is your battery made with 18650 cell with finished size of 19670? I recently bought from you some AW P18650-26 thinking it was them (since Henry from HDSLIGHT is selling some 2600mAh ones) and the two I got from you are too wide to fit in my RA Clicky tube.

Can you guide me and tell me what I should order so I will have 2600mAh that will fit in my RA Clicky tube? (18650 cell with finished size of 19670) I don't see it on your selling list...

Thanks!

[AW]

ninemm,
mauriciopeppino,

Orders shipped. Thanks!


MeLLoJeLLo : The size of my P18650-2600 measures 18.52 X 68.16mm ( +/- 0.3mm ). If the ones you have are 19mm in diameter, you can return them for exchange.

[MeLLoJeLLo]

ninemm,
mauriciopeppino,

Orders shipped. Thanks!


MeLLoJeLLo : The size of my P18650-2600 measures 18.52 X 68.16mm ( +/- 0.3mm ). If the ones you have are 19mm in diameter, you can return them for exchange.

I didn't know I could exchange them so I really tried to make them fit by removing the black plastic around one of them. They never got the chance to be used once. Can I return them even if the black plastic is removed on one of them? If no, I'll return the one that is okay.

What is your address for shipping it back? You can PM me or better send an email if you need discretion.

Thanks!

[AW]

Please give me your email address for return info. I can do an exchange for the one without the torn wrapper.

AW

[Wilkerson Brasil]

3xIMR16340
Shipping
Registered Airmail

Total= 25,5

[MeLLoJeLLo]

Please give me your email address for return info. I can do an exchange for the one without the torn wrapper.

AW

PM sent. Thanks.

[StickThatClutch]

I was interested in getting setup with RCR123s. Does the WF-139 come with the requisite spacers to charge these? Thanks!

[fabienne]

(1) Protected 18650 ( 2600mAH ) ---- $14.75
(5) Protected R123A ( 750 mAH ) ----- $30.00
(1) CR123 Battery holder -------------- $ 10.00
International shipping $5.00
Total $54.75

Unique Transaction ID #03P11672G20529734

[AW]

StickThatClutch,

Yes, two 15mm spacers are included with the WF-139.

AW

[pugga]

Hi AW,

Payment for,
2x *** NEW AW P18650 ( 2600mAH ) $14.75
2x Protected R123A ( 750 mAH ) $ 6.00
2x IMR 16340 $6.00
CR123 Battery holder $ 10.00
Plus 4.50 shipping +$3 extra registered
Total = $71

Cheers pugga

[MWA102464]

I would like to purchase some of your newer 18650 Batts and the newest 3v rcr123's how do I go about doing this and where do they ship from
Thanks
MWA102464

~~~~~~~~~~~~~~~~~~~~

Hey im new to this forum , I would like to order some Batts from you do I just email you to get it done, whats the process here ? im looking for your new 18650 and the new 3v RCR123 Batts

[AW]

Wilkerson Brasil,
pugga,

Orders shipped. Thanks!


fabienne : Please check PM.

[kosPap]

AW is a 12V cable included with the charger...

and if not what is the cost of it/postage?

[AW]

The 12V car cord is an optional item available for $2.50. Postage is $1.25.

AW is a 12V cable included with the charger...

and if not what is the cost of it/postage?

[designedfor1]

20 x P18650-26 + charger PM replied, thanks again!

[AW]

designedfor1,

Order shipped.

Thanks!
AW

[klorsaw]

I'm still trying to figure out if I want to start using Li-ion rechargeable's due to safety concerns regarding chargers for them.I've been looking at some hobby chargers.

Does anyone know if the AW P18650 2600mAh Protected cells should be treated as Lilo or Lipo or LiFe type cells?It's quite confusing.

Any advice would be much appreciated.

[PerttiK]

AW,

2 X protected 14500 $18
normal shipping $4.50
-----------------------
= $22.5

[jcw122]

AW,

2 x Protected 17670 ( 1600mAH ) ---- $10.00 each
+ 4.50 shipping

= $24.50 total.

PP Sent!