• CPFMarketPlace is now a read-only archive for reference. New registrations and creating new posts and threads have been disabled.
• The Manufacturer's and Dealer's Corners have been moved to the Commercial Corner on CandlePowerForums.com.
• Want To Sell (WTS) and other sales threads will now be listed at The CPF Mall
• Want To Buy (WTB) and Want To Trade (WTT) will be listed in a specific forum in the General MarketPlace on CandlePowerForums.com.
• Additional information regarding these changes can be found in the Administrative Announcements forum on CandlePowerForums.com.
Page 1 of 6 12345 ... LastLast
Results 1 to 30 of 167
  1. #1
    Flashaholic kpd151's Avatar
    Join Date
    Oct 2006
    Posts
    114

    Grinser2 Krypto-Lite Housings (Titanium, Stainless, and Brass)

    Hola Muchacos ! It has been a while since I have been able to offer any of these for sale. I made a large group for The Blade Show in Atlanta and I had a few pieces left. Some of you have inquired about availability so I thought I would offer them up. So here they are .

    These are all Krypto-lite v2.0's with the Interchange System. For those not familiar with the Krypto-lite Interchange System... this system is designed so buyers can provide and install their own vials (vials are not included). These devices utilize a system that allows buyers to change vial colors, replace a vial if is damaged or expired, or harvest vials for other purposes. The housings are turned from solid 3/8" or 1/2" solid rod stock then they are milled, drilled, and tapped to accept a 10-32 set screw. The set screws are milled with a thru hole that allows the trit vial to be seen from the end. Each piece is fitted with a solid stainless steel or solid brass split ring. Buyers will also receive a tool kit that has a hex key wrench and three pieces of clear tubing (already cut to fit 3x23mm vials). The tubing for the Chinese Lanterns is slightly oversized to allow use of a 3x23mm vial but account for the additional distance between the bottom of the vial and the set screw. You can load one tube and save the others for later or load all three with your favorite colors so you can change out trit vials at your discretion. You could even use glow powder resin instead of a trit vial if you prefer. Everything will come packaged in a bag with a card and a small set of instructions.

    Chinese Lantern in 303 Stainless Steel with Polished Finish SPF



    Perforated 303 Stainless "Black Out" (Black Oxide Treatment) SPF


    Perforated 6al-4v Titanium with Polished Finish SPF



    Chinese Lantern in 6al-4v Titanium with Polished Finish SPF



    Perforated Naval Brass with Antique Finish SPF



    Chinese Lantern in Naval Brass with Antique Finish SPF



    Chinese Lantern 303 Stainless "Black Out" (Black Oxide Treatment) SPF


    Perforated 6al-4v Titanium with Bead Blast Finish SPF


    IMPORTANT STUFF

    Price for the housings are as follows:
    • Chinese Lantern in 303 Stainless- $88 SPF
    • Perforated 303 Stainless "Black Out"- $100 SPF
    • Perforated Titanium- $100 SPF
    • Perforated Naval Brass with Antique Finish- $85 SPF
    • Chinese Lantern in Titanium w/Polished Finish- $100 SPF
    • Chinese Lantern 303 Stainless "Black Out"- $100 SPF
    • Chinese Lantern in Naval Brass w/Antique finish- $85 SPF
    • Perforated Titanium with bead blast finish- $105 SPF


    • This is a housing system. Tritium vials are not included.

    • CONUS shipping is $3 per order (regardless of quantity). International orders will be assessed actual shipping cost based on location.

    • Payment can be made by Paypal, Money Order, or a personal check if I know you.

    • Krypto-lite Zombie Repellent T-shirts are $18. They come in black, black, or black. Sizes S-2XL. Some sizes are getting a little limited. If you order a shirt and a Krypto and you are in the CONUS I will cover the shipping costs.

    Back

    Front
    Last edited by kpd151; 08-24-2010 at 09:31 PM.

  2. #2
    Flashaholic kpd151's Avatar
    Join Date
    Oct 2006
    Posts
    114

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Chinese Lantern in Titanium w/Polished Finish, Chinese Lantern 303 Stainless "Black Out" both SPF.

    One Chinese Lantern in Naval Brass w/Antique finish and one Perforated Titanium with bead blast finish SOLD. One of each remaining.

  3. #3
    Flashaholic kpd151's Avatar
    Join Date
    Oct 2006
    Posts
    114

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Several more pieces sold. Original post updated. For simplification. Here's what's left (one of each)...

    Perforated 303 Stainless "Black Out"- $100
    Chinese Lantern in 303 Stainless- $88
    Perforated Naval Brass with Antique Finish- $85
    Perforated Titanium- $100

  4. #4
    Flashaholic kpd151's Avatar
    Join Date
    Oct 2006
    Posts
    114

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Perforated Naval Brass with Antique Finish SPF. Three pieces left...

    Perforated 303 Stainless "Black Out"- $100
    Chinese Lantern in 303 Stainless- $88
    Perforated Titanium- $100

  5. #5
    Radiant Administrator B@rt's Avatar
    Join Date
    Nov 2001
    Location
    Land of Tulips and Philips
    Posts
    4,461

    Arrow Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    I would like the Ti one please.

    Please pm me for your PP addy.
    BART

  6. #6
    Flashaholic kpd151's Avatar
    Join Date
    Oct 2006
    Posts
    114

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    PM on the way B@rt.

  7. #7
    Radiant Administrator B@rt's Avatar
    Join Date
    Nov 2001
    Location
    Land of Tulips and Philips
    Posts
    4,461

    Wink Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Replied and
    BART

  8. #8
    Flashaholic kpd151's Avatar
    Join Date
    Oct 2006
    Posts
    114

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Quote Originally Posted by B@rt View Post
    Replied and
    Got it. It will ship tomorrow.

  9. #9
    Flashaholic
    Join Date
    Aug 2009
    Location
    Indiana
    Posts
    155

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Will you be making any more? I would like one of the Perforated Titanium if you do.

    Thanks,
    Shayn

  10. #10
    Flashaholic kpd151's Avatar
    Join Date
    Oct 2006
    Posts
    114

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Shayn- PM sent

    Perforated Stainless Black Out Krypto has been sold.

    And then there was one... 303 Stainless Chinese Lantern remaining.

  11. #11
    Flashaholic kpd151's Avatar
    Join Date
    Oct 2006
    Posts
    114

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    These are SOLD OUT! Thanks guys!

  12. #12
    Flashaholic Barefootone's Avatar
    Join Date
    Jul 2003
    Location
    East Brady, Pa.
    Posts
    123

    Wink2 Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    kpd151,

    Any plans for future production?
    They look really sweet .
    Keep-em bright in the night .

  13. #13
    Flashaholic kpd151's Avatar
    Join Date
    Oct 2006
    Posts
    114

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Quote Originally Posted by Barefootone View Post
    kpd151,

    Any plans for future production?
    They look really sweet .
    Absolutely. These have been an ongoing project for the last couple of years. I will probably have another group ready sometime in late July.

  14. #14
    Unenlightened
    Join Date
    May 2006
    Posts
    2

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    anyway of getting on a waiting list?

  15. #15
    Unenlightened Lapp_Dance's Avatar
    Join Date
    Sep 2006
    Location
    SE Michigan
    Posts
    3

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Quote Originally Posted by danroot View Post
    anyway of getting on a waiting list?

    yes, I too am interested in these, and would like to know if more will become available.

  16. #16
    Enlightened
    Join Date
    Jul 2010
    Location
    Kuwait,USA,UK
    Posts
    34

    Popcorn Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Same, am so interested of buying these Chinese Lantern, i know its all sold out , please let me know if you get any more of these Lanternof , specially these one :
    - Chinese Lantern in 303 Stainless Steel with Polished Finish SPF
    - Perforated 6al-4v Titanium with Polished Finish SPF
    - Chinese Lantern in 6al-4v Titanium with Polished Finish SPF

    please PM when you get these i listed

    Thank's,
    Last edited by Othman; 08-01-2010 at 06:29 PM.

  17. #17
    Flashaholic kpd151's Avatar
    Join Date
    Oct 2006
    Posts
    114

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Sorry for the delay guys. Several commitments have kept me out of the shop for a while. After getting those taken care of I am finally back in full swing.

    PM's sent to interested parties.

  18. #18
    Flashaholic maskman's Avatar
    Join Date
    Jun 2009
    Location
    OK
    Posts
    190

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    I'm fairly certain I read you didn't take pre-orders. If you've changed that policy please add me to the list. Thanks!

  19. #19
    Unenlightened
    Join Date
    Jan 2010
    Posts
    3

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    kpd151,

    i'm interested in the perforated 303 stainless "black out"... please let me know when they are available. thanks!

  20. #20
    Flashaholic
    Join Date
    Jul 2010
    Location
    SF Bay Area
    Posts
    134

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Subscribing to this thread. Interested in several of these myself.

  21. #21
    Flashaholic malakye666's Avatar
    Join Date
    Feb 2010
    Posts
    103

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    Perforated titanium let me know when your ready will send pp my email is jimtones@optusnet.com.au thanks great looking stuff

  22. #22
    Flashaholic*
    Join Date
    Aug 2006
    Location
    Central VA
    Posts
    992

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    I'm interested in these, please let me know when you have more available. Thanks!

  23. #23
    Flashaholic ryanandty's Avatar
    Join Date
    Aug 2010
    Location
    Pittsburgh Pennsylvania
    Posts
    136

    Default Re: Krypto-Lite Tritium Housings (Titanium, Stainless, and Brass)

    I subscribed as well, those lanterns in naval brass are stunning!

  24. #24
    Unenlightened
    Join Date
    Jan 2011
    Posts
    1

    Default Re: Krypto-Lite Housings (Titanium, Stainless, and Brass)

    Hi hpd151,
    I am interested in the Chinese Lantern in Naval Brass with Antique Finish. Please let me know if you have any available.
    Thank you

  25. #25
    Unenlightened
    Join Date
    Dec 2010
    Posts
    8

    Default Re: Krypto-Lite Housings (Titanium, Stainless, and Brass)

    these are amazing.. i would love one of these

  26. #26
    Flashaholic kpd151's Avatar
    Join Date
    Oct 2006
    Posts
    114

    Default Re: Krypto-Lite Housings (Titanium, Stainless, and Brass)

    Quote Originally Posted by katalyst View Post
    these are amazing.. i would love one of these
    PM incoming.

  27. #27
    Flashaholic calipsoii's Avatar
    Join Date
    May 2009
    Posts
    306

    Default Re: Krypto-Lite Housings (Titanium, Stainless, and Brass)

    PM sent

  28. #28
    Flashaholic*
    Join Date
    Nov 2009
    Location
    The Great Northwest
    Posts
    923

    Default Re: Krypto-Lite Housings (Titanium, Stainless, and Brass)

    I'm interested in a Damascus or Ti krypto-Lite.

  29. #29
    Unenlightened
    Join Date
    Feb 2011
    Posts
    2

    Default Re: Krypto-Lite Housings (Titanium, Stainless, and Brass)

    Hi,
    I'm new to CPF. Are you still selling these? I'm interested in a Chinese lantern in Naval Brass Antique finish. I can't figure out PM on this site. You can PM me but if possible please email me at busterbob24@gmail.com thank you.

  30. #30
    Administrator Norm's Avatar
    Join Date
    Jun 2006
    Location
    Australia
    Posts
    2,078

    Default Re: Krypto-Lite Housings (Titanium, Stainless, and Brass)

    Quote Originally Posted by busterbob24 View Post
    I can't figure out PM on this site. You can PM me but if possible please email me at busterbob24@gmail.com thank you.
    Did you read the FAQ's as sugested when you first joined?
    Norm

Page 1 of 6 12345 ... LastLast

Bookmarks

Posting Permissions

  • You may not post new threads
  • You may not post replies
  • You may not post attachments
  • You may not edit your posts
  •