AWM-V60C loose screws

[Kilted]

This is a question for Sunwayman.

Please read on the main cpf form thread; http://www.candlepowerforums.com/vb/showthread.php?323288-Sunwayman-V60C-amp-Charging-Base-review-%28runtime-beamshots-pics-%29&p=3790837&highlight=sunwayman+v60c#post3790837 starting from my post #36.

There is a problem with the bottom contact screws coming loose and needing to be tightened. Can these screw's set with loctite?

Input needed as the "Soft Contact" charge port has been causing some concerns.

Thank you

=D~~ Kilted

[sunwayman]

This is a question for Sunwayman.

Please read on the main cpf form thread; http://www.candlepowerforums.com/vb/showthread.php?323288-Sunwayman-V60C-amp-Charging-Base-review-(runtime-beamshots-pics-)&p=3790837&highlight=sunwayman+v60c#post3790837 starting from my post #36.

There is a problem with the bottom contact screws coming loose and needing to be tightened. Can these screw's set with loctite?

Input needed as the "Soft Contact" charge port has been causing some concerns.

Thank you

=D~~ Kilted

Hi, thank you for the feedback and email, we will apply Thread Locking Adhesive on the light end screws in the future. For now, we will replace one for you, please check your email later regarding how to get this processed, thanks.


Best Regards,

[Kilted]

SWM, thank you for the almost instant reply. I really like your products, I hate to see small things cause a problem with an otherwise excellent product.

=D~~ Kilted