Is Bugout Gear going to be carrying the L2 or did I completely misunderstand a post?
No they aren't/yes you did. If you look at the buyers in the first post you'll see that Flavio bought #2 so you could say that one person at Bugout Gear will be carrying one. Assuming he gets a replacement for the one he's returned.
Also, which version of the L2 is offered for 75% of and where is the sales page......is this the sales page?
Short answer, neither.
Long answer, any Neofab product is being offered at 25% discount to the 21 people on the Premium version order list as compensation for the shambles it has become.
Finally, yes this is the sales thread, see the first post.
Kev.
rainsingin
05-04-2009, 07:49 AM
......is this the sales page?
Thanks :)
Paul
you can only order the "standard" version and i think neoseikan would prefer you now use his website to order: http://neo-fab.com/legionII/legionII.htm (http://neo-fab.com/legionII/legionII.htm)
you may want to wait to order though as i'll be pleasantly surprised if the standard versions ship before july 1st. also, if i were you i'd wait to see some reviews of the standard version before you order.
thanks
PsychoBunny
05-04-2009, 01:17 PM
No problem. Legion II, new Spartanian II, anything is OK. If you are in the premium pre-order list.
Only 20+ people will have this discount. Because you supported me so much.
And I don't want to make you unhappy for my problems.
But Neo, I AM supporting you by buying a standard version!
Right? ;) :huh:
Sooooooo, can I have another standard L2 for even 50% off?? ;) ;) :crackup:
(I'm just teasing, since I'm psycho and all!! :sick2: :duh2: :huh: ;) )
TITAN1833
05-04-2009, 01:44 PM
No problem. Because you supported me so much.
And I don't want to make you unhappy for my problems.
But Neo, I AM supporting you by buying a standard version!
Right? ;) :huh: Err :thinking: :whistle: :sssh:
ace0001a
05-04-2009, 07:54 PM
A discount of sorts would be nice even for the standard version early adopters (those of us who put down money to pre-order one) for our patience as well. I don't think that's unreasonable in my opinion. Most importantly for myself, I would be happy if my standard version showed up with any tint warmer than WC. Hopefully Neo got his has hands on at least some WDs if not WGs or WHs. For me, there has been too much hype about the Legion II to have any let downs because of small details. Sure tint selection is not as big of a concern as battery size compatibility, but it's a detail none the less that shouldn't be overlooked for a premium flashlight. I have faith that Neo will do right by this flashlight.
radu1976
05-05-2009, 05:28 AM
Neo I think where the confusion started was when you used the term "OF" as opposed to "OFF" :D i.e 75% of 100 =75 where as 75% off 100=25 :devil:.
So it would be better IMO to write 25% OFF! and not 75% OF! future purchases, provided you have purchased a premium version L2
:)
TITAN , I have seen too many times the 'IMO' word being used here...! What does that means if you don't mind ? :thinking::thinking::thinking:
AardvarkSagus
05-05-2009, 05:35 AM
TITAN , I have seen too many times the 'IMO' word being used here...! What does that means if you don't mind ? :thinking::thinking::thinking:
If I am not mistaken it is merely a way of saying In My Opinion...
TITAN1833
05-05-2009, 05:38 AM
TITAN , I have seen too many times the 'IMO' word being used here...! What does that means if you don't mind ? :thinking::thinking::thinking:Hi I use it short for, in my opinion. ;)
PsychoBunny
05-05-2009, 06:33 AM
Err :thinking: :whistle: :sssh:
LOL!!! ha ha!! PsychoBunny is talking nonsense again!!! :duh2: :whistle:
PsychoBunny
05-08-2009, 12:44 PM
Hmmmmm! no activity here! I dont know if that's a good sign or bad!!
So, I think it's been 2 1/2 months now, what's the update on the
standard units?
At least my wait is over for my Eagletac M2, which was one of the most
anticipated events for flashahloics in a few years.
I am thinking the M2 and this L2 will be the 2 main contenders for "Best Flashlight of The Year Award" here at CPF.
Anyone who is lucky enough to own both want to start the vote? :thumbsup:
ace0001a
05-08-2009, 01:36 PM
Yeah it has been a little quiet around here lately. It could be that Neo is concentrating on getting things done or progress in general has actually been so slow that he has nothing to report. I hoping it's because he's concentrating on getting things done.
9x23
05-08-2009, 01:49 PM
Hmmmmm! no activity here! I dont know if that's a good sign or bad!!
So, I think it's been 2 1/2 months now, what's the update on the
standard units?
At least my wait is over for my Eagletac M2, which was one of the most
anticipated events for flashahloics in a few years.
I am thinking the M2 and this L2 will be the 2 main contenders for "Best Flashlight of The Year Award" here at CPF.
Anyone who is lucky enough to own both want to start the vote? :thumbsup:
My Eagletac M2 just landed and I'm charging the batteries now so I haven't had a chance to use it yet. I'm not sure why I was expecting to feel a detent at each light setting but there is none. Upon first glance the workmanship looks very nice, and it was a nice surprise to see that the stainless bezel is screwed all the way down without a gap....that's a first for me. On the other hand I've been using my Legion 2 for a week now and really appreciate the battery gauge, which I don't think the M2 has. Nonetheless, one thing is certain. Bright lights in relatively compact sizes are addicting! I really like the 18650 format and am now considering an FM Megallenium with some sort of hi powered LED retrofit like LZ's stuff.
9x23
steed77
05-08-2009, 02:49 PM
WOW... I hope this makes it to me 100%
This is not a cheap light... been a very long time in the making. :candle:
neoseikan
05-09-2009, 05:28 AM
Hi, People. I am checking and cleaning the final 12 pcs of Legion II,
and they will be packed tonight and sent out tomorrow morning.
After that, I will go to airport, and spend 11 days in Guangdong.
I will visit the workshop, to make sure they will built standard version better.
I will also visit some dealer there.
I will visit the forum and reply mails in the trip.
Yours, Neoseikan
AardvarkSagus
05-09-2009, 08:16 AM
Hi, People. I am checking and cleaning the final 12 pcs of Legion II,
and they will be packed tonight and sent out tomorrow morning.
After that, I will go to airport, and spend 11 days in Guangdong.
I will visit the workshop, to make sure they will built standard version better.
I will also visit some dealer there.
I will visit the forum and reply mails in the trip.
Yours, Neoseikan
Sounds to me like this is good news.
applevision
05-09-2009, 05:51 PM
My Eagletac M2 just landed and I'm charging the batteries now so I haven't had a chance to use it yet. I'm not sure why I was expecting to feel a detent at each light setting but there is none. Upon first glance the workmanship looks very nice, and it was a nice surprise to see that the stainless bezel is screwed all the way down without a gap....that's a first for me. On the other hand I've been using my Legion 2 for a week now and really appreciate the battery gauge, which I don't think the M2 has. Nonetheless, one thing is certain. Bright lights in relatively compact sizes are addicting! I really like the 18650 format and am now considering an FM Megallenium with some sort of hi powered LED retrofit like LZ's stuff.
9x23
Please please please give us a comparison, 9x23! I can't wait to hear your thoughts!!! :bow:
neoseikan
05-13-2009, 04:41 AM
Today, in Hongkong.
Hard to visit internet.
But I made it.
I paid the workshop for the bodies, but still need to wait.
What can we get this time?
1- Longer tube.
2- A regular but good HA finish, not less than Fenix/Jetbeam.
3- Better waterproof.
4- Easier to assemble.
I ask for your kind patient again, this time, it worth waiting.
BTW, I also hope there can be more orders, Legion II is our favorite product, and it worth more than the price you pay.
We can get a TK40 or M1X at the half cost of Legion II, but we choose to produce a geek item, but not a regular one made in China.
Fireballix
05-13-2009, 05:39 AM
Greetings from Austria,
neoseikan.....i would like to buy a Legion 2.
Do you ship to austria/vienna? Do you accept payment via paypal ?
regards,
Luke
rainsingin
05-13-2009, 10:22 AM
hi luke,
the official order-form website: http://neo-fab.com/legionII/legionII.htm (http://neo-fab.com/legionII/legionII.htm)
oh, and i just noticed this pic of a legion II over on the lummi thread (http://www.candlepowerforums.com/vb/showpost.php?p=2950531&postcount=9). in this pic, for some reason, it looks smaller than i've imagined. looks like a great size.
thanks,
steven
Fireballix
05-14-2009, 12:13 AM
Thx 4 reply - i know the website but i wont order until it's sure that the Legion II is in stock and ready to ship. As soon as neo gives me his okay that the flashlight is ready to ship i will make my payment. :thumbsup:
Further i'd like to talk about a discount :whistle:
greetings from austria
Luke
PsychoBunny
05-14-2009, 11:44 AM
Thx 4 reply - i know the website but i wont order until it's sure that the Legion II is in stock and ready to ship. As soon as neo gives me his okay that the flashlight is ready to ship i will make my payment. :thumbsup:
Further i'd like to talk about a discount :whistle:
greetings from austria
Luke
According to the Neofab website, the standard edition L2's will be
shipping early April!
I havent seen any of Neo's posts offer any ETA for us folks who are
impatiently waiting.
Unless this light really blows me away when I finally get it, this will be
the last time I ever order anything from this guy :thumbsdow
ace0001a
05-14-2009, 02:49 PM
According to the Neofab website, the standard edition L2's will be
shipping early April!
I havent seen any of Neo's posts offer any ETA for us folks who are
impatiently waiting.
Unless this light really blows me away when I finally get it, this will be
the last time I ever order anything from this guy :thumbsdow
Like many, I myself haven't been too happy with how things have transpired so far. But I am willing to give Neo the benefit of the doubt as I truely believe that the Legion II with all kinks hammered out to be a top notch flashlight. In hindsight, perhaps a standard version should have been released first with all of the problems to be resolved and revised there before making the premium version. So I do feel for those who paid more and paid first for the premium only to run into a few minor problems. At the same time since I put money down early for the standard version, I am happy to know it will have the revisions that resolve the early reported issues. Aside from the battery fitting issues, my main concern is still with the tint of the emitter...as from my perspective that a premium flashlight should not only use a commonly available extremely cool tint (WC). I am hoping Neo was able to at least procure a batch of WD tinted MC-Es (if not WG or WH) for those who prepayed for either version. I would not be surprised if the standard production version for retail sale will only use WC tint MC-Es, everyone else seems to always use it. With that said, hopefully we'll see all Legion II orders shipping within the next month or so.
evenchaos
05-14-2009, 03:25 PM
I too have to point out my displeasure with the lack of communication and problems with the initial batch. Seems almost like a repeat of the Tiablo A10/ACE fiasco only this time, with us paying more for the first batch rather than having a discount.
I know Neoseikan is saying that he has problems paying for the manufacturing, but then how do you account for the fact that people have prepaid for their lights in advance. I am still waiting for my Spartan II rev.2 and he is saying that he needs to raise funds with the Legion II production :confused: Maybe he can compensate by getting an XP-G emitter into Spartan by the time I get it :grin2:.
Anyways, I am glad to see that Neoseikan has added "sent" beside my order (though what's with the kept vs. taken line anyways?)
However, I don't know how customized my copy will be. The main attraction for getting the "premium" version vs the regular was the fact that these would be hand made and customized. Unfortunately, that seems to have been possibly lost - Neo hasn't said anything since (did he manage to get a sample of my preferred LED?). It was NOT the better aluminum (I don't expect to see any real world difference in that regards - if it was Titanium, then that would have been another matter).
Here is hoping for the best; I have yet to receive it so I really am not sure what to expect. For now, its a waiting game with no tracking numbers :(.
neoseikan
05-15-2009, 02:49 AM
I too have to point out my displeasure with the lack of communication and problems with the initial batch. Seems almost like a repeat of the Tiablo A10/ACE fiasco only this time, with us paying more for the first batch rather than having a discount.
I know Neoseikan is saying that he has problems paying for the manufacturing, but then how do you account for the fact that people have prepaid for their lights in advance. I am still waiting for my Spartan II rev.2 and he is saying that he needs to raise funds with the Legion II production :confused: Maybe he can compensate by getting an XP-G emitter into Spartan by the time I get it :grin2:.
Anyways, I am glad to see that Neoseikan has added "sent" beside my order (though what's with the kept vs. taken line anyways?)
However, I don't know how customized my copy will be. The main attraction for getting the "premium" version vs the regular was the fact that these would be hand made and customized. Unfortunately, that seems to have been possibly lost - Neo hasn't said anything since (did he manage to get a sample of my preferred LED?). It was NOT the better aluminum (I don't expect to see any real world difference in that regards - if it was Titanium, then that would have been another matter).
Here is hoping for the best; I have yet to receive it so I really am not sure what to expect. For now, its a waiting game with no tracking numbers :(.
Hi, Man. Sorry, I have the tracking numbers, but I was in a trip, and can hardly use internet. So, can I send it to you when I am back?
BTW, I said in neo-fab.com:
"Standard Version Legion II will be available for shipping in May."
It needs more time, sorry for that, but why some one think I promised to ship in early April?
TITAN1833
05-15-2009, 04:45 AM
Hi, Man. Sorry, I have the tracking numbers, but I was in a trip, and can hardly use internet. So, can I send it to you when I am back?
BTW, I said in neo-fab.com:
"Standard Version Legion II will be available for shipping in May."
It needs more time, sorry for that, but why some one think I promised to ship in early April?Neo people can't be blamed for thinking early April as you stated in your first post dated 02/24/2009 shipping within 2~2.5 months,so anyone reading that could think 2~2.5 being the latest shipping schedule but! more likely they would expect it to ship from 1 to 8 weeks,within 2 months, "WITHIN" being the key word.
PsychoBunny
05-15-2009, 07:36 AM
Bottom of this page still says May, but someone on another thread
said they got a email from Neofab saying early June!? :confused:
My above post saying April was an error, sorry :duh2:
http://neo-fab.com/legionII/legionIIbuy.htm
Cleron
05-18-2009, 02:37 AM
Mine arrived today. The anodising is flawed like all the others so far, and the tail (not the cap) section is a miss matched colour to the rest of the body. The tail is a light silver/gold while the head & swivel switch is a deep brassy gold. The head lacks the polish of the switch, so the hole light is a real hodge podge of mixed visual quality. I probably could have lived with the spot marks, but the miss matched colours really makes me cringe.
On the bright side I didn't have as much trouble with the tail cap as others. Neo did seam to fixed this problem, although he pretty much did what every one else did with the solder blobs (just looks a bit prettier), even so I was able to use the light with little effort. My only real gripe is that there could have been a longer thread on the tail cap & light. This would have made it that little bit easier to get the cap on with out as much effort. It's not bad mind you, but could be better. (first thing you should do is get some lubrication on the thread, helps a hell of a lot)
The sad part about all of this is the fact that the light really is an awesome little thing when you get it going. The light flashes once to indicated when it's permanently on (after 2 seconds, and 2 seconds to turn off) so there's no guess work like with the prototype. The battery check function (reverse hold to the on/off) is also a nice feature. You just swivel to the switch left or right to change the mode up, or down.
The swivel switch is easy to use & feels quite natural in most grips. It could probably be improved as the swivel area is large (1/3 of the tail) & can be some what unstable (obviously, it's a swivelling switch) depending on how you hold the torch. Ultimately a smaller switch, or an extra inch on the tail length could have helped with this, but it still feels like a great system, and it adds far more then it takes from the torch.
In terms of beam it's a real impressive little beastie. Lots of throw with just enough flood at close range to keep most people happy. Even with the orange peal reflector there is a hole that becomes apparent at around 5-6 meters. It starts off like a holy cross in the pattern at a meter or under, and gradually expands into a very small hole. That said I really don't feel it takes anything away from the light, it truly is quite impressive for the size.
Over all I am disappointed with the visual appearances of my light. Neo really needs to make sure the production batch is up to snuff, because the premium version falls far behind in quality despite the "premium" price. That said I would go so far to say that I might even look at getting a production Legion II, because I really do like the light. I just wish I didn't pay half as much again for half the light people will be getting who paid half as much.
If you are getting a production light I would stay the course.
"Edit" I thought this would be interesting to those who have bought the premium version. It's about 7075 blistering
Anodic Coating Blisters on 7075
Q. We do Type III (hardcoat) anodizing. Occasionally, we get parts to anodize that are made from 7075-T6 alloy. When these parts are anodized they sometimes exhibit what looks like blisters in the anodic coating. What causes this to occur and how can the condition be eliminated? Our bath is 175-g/liter sulfuric, 6-8-g/liter aluminum. We use a proprietary anodizing additive and operate the bath at 40F. M.H.
A. This is an interesting phenomenon. I know anodizers who have lots of experience with 7075-T6 alloy but have never run into this blistering condition. I, in fact, had never seen it first hand until I received the sample from you, and I've anodized a lot of 7075. You can be somewhat relieved that the problem lies not in your process, but is a metallurgical condition.
Various descriptions of this condition that I have read go something like this. It's all about dissolved gases found in aluminum billet. Since hydrogen gas is soluble in aluminum, it sometimes precipitates out of solution in the process of being converted from the ingot to heat treated billet. The hydrogen may come from excess humidity present during heat treatment, the presence of moisture in the casting furnace or in the aluminum “charge” used in billet casting. The precipitated hydrogen forms pores in the aluminum billet. When extruded, these pores collapse, but instead of “healing” they form an interface between the flattened pore or void and the metal around it. As the anodic coating grows inward during anodizing, these interface areas become potential sites for blistering. When the coating reaches an interface it can actually separate from the substrate, forming a blister.
If this problem occurs consistently with one or more part numbers or batches of metal, it could be worth the effort for the part manufacturer to change metal suppliers in hopes that it might eliminate the problem.Heh, so it's not Neo's fault by the looks of it. Doesn't exactly explain why my light seams to have 2 different colours but "shrugs". Good news for the standard production though. The issue with 7075 can be prevented from what i have read, but it all seams like a lot of effort for a perfect ano.
ledaholic
05-20-2009, 06:32 AM
Picked mine up from the Post Office today. Looks pretty much as described by everyone else. Can't check it out till I get home, no batteries at work :oops:
Sector7
05-20-2009, 12:11 PM
Someone engraved "Legion" upside down on my tailcap :shakehead.....everything else works well, AW 18650s fits the battery slots with no problem.
TITAN1833
05-20-2009, 12:17 PM
Someone engraved "Legion" upside down on my tailcap :shakehead.....everything else works well, AW 18650s fits the battery slots with no problem.LOL think of it this way! you may have a collectors piece :)
steed77
05-20-2009, 12:41 PM
Mine is here too... I echo the above. Bright yes, finish poor, switch fair.... at least for the $$ dropped on this ONE light, I could of got a few nice lights.
IMO: I could of done better
Caveat emptor
TITAN1833
05-20-2009, 12:54 PM
Ok I'll sum this up in one,brightest maybe? the best no way! there are better out there IMHO.Neo you need to up the ante :twothumbs and no more BS! give the guys what you promised :poof:
niner
05-20-2009, 01:10 PM
Honestly, I fell like we were buying prototype samples, lights that otherwise should be scrapted, not a preminum light as advertised.
Live to learn.
Armed_Forces
05-20-2009, 02:08 PM
I hope everyone is learning their lesson regarding ALL of these pre-pays. :caution:
For those that love supporting people like Neoseikan, more power to you, but I really wish a flashlight wouldn't be offered for sale until a final, fully working/cosmetically correct sample had been produced that would be representative of the one to be delivered. I completely understand the desire to bring a new product to market, but the #1 reason for start-up business failure is lack of capital. It seems that these pre-pays are a way to get some venture capital, but the problem is, you've got to deliver! You can only add so much into the initial price to try and cover unforeseen problems, but it's impossible to put a price on lack of experience. Good luck on the production model, I might pick one up if it's up to snuff.
easilyled
05-20-2009, 02:40 PM
Funny thing is that in the 5th photo of the first post (the one with the Legion II on top and Jetbeam M1-X underneath),
the anodizing looks obviously blotchy in the Legion II.
This is one of the first things that I noticed. Then on top of this were the additional factors that it was offered as a pre-sale
and that there was also a conspicuous "donut" reported. I felt that in view of this it was taking too much of a chance to order a Premium version.
I don't want to come across as smug, because the lights could have been fantastic and then I would have regretted not ordering one.
I have, over the years on CPF, seen many pre-sales go badly wrong, so I will rarely commit to any nowadays.
TITAN1833
05-20-2009, 02:43 PM
I might pick one up if it's up to snuff.Yes! snuff is right good luck guys,Neo! your fired :thumbsdow
Sector7
05-20-2009, 02:58 PM
for shame Arm_Forces, you would consider a torch with no clip :nana:
ledaholic
05-20-2009, 03:02 PM
Well, I got home, installed batteries and it turned on. The UI is good and seems to function properly. The emitter is way off center, I'll have to work on that. The tail cap etching is a little wierd, Legion is upsidedown.
This is the first time I have had a problem with a pre-order. Looks like it will be my new beater light.
TITAN1833
05-20-2009, 03:08 PM
for shame Arm_Forces, you would consider a torch with no clip :nana:Not really clip means,(credit) card,(lob) (it )away it's only a (pound ):D
TITAN1833
05-20-2009, 03:16 PM
Well, I got home, installed batteries and it turned on. The UI is good and seems to function properly. The emitter is way off center, I'll have to work on that. The tail cap etching is a little wierd, Legion is upsidedown.
This is the first time I have had a problem with a pre-order. Looks like it will be my new beater light.Like I said a collectors item ;)
matrixshaman
05-20-2009, 03:46 PM
Well, I got home, installed batteries and it turned on. The UI is good and seems to function properly. The emitter is way off center, I'll have to work on that. The tail cap etching is a little wierd, Legion is upsidedown.
This is the first time I have had a problem with a pre-order. Looks like it will be my new beater light.
That's not a Legion - it's the new Noigel - really.
:oops:
evenchaos
05-20-2009, 03:54 PM
Alright! Who's got my tail-cap ?!
:touche::dedhorse::xyxgun:
......
Thats has got to be one awful way to state that I just got my light from the postman just minutes. Still haven't had a chance to play with it, but like the previous poster showed, I also got a NOIGEL light with S/N 22. :shakehead
Where is my #1:sick:
tpchan
05-20-2009, 04:24 PM
Well I have #11, which arrived today from my local post office. The package is marked with a date of 20090512, so 8 days from China is not too bad to Illinois. My emitter seems to be centered as far as I can tell. I too have the "upside-down" Legion lettering on my tailcap. Small anodizing imperfections on the main body/grip of the light. The bezel seems very nice and the head seems to be anodized fairly well. The control ring seems to be working nicely and is anodized nicely. I did pay for the OP reflector installed and the SMO reflector on the side, but the SMO reflector seems to have been omitted from my package (which arrived intact, no tears nor rips). Sent an email to Neoseikan and I hope this oversight is corrected. I'm using unprotected 18650 cells in it with no problems making contact.
You should keep bugging Neo for a replacement. The end-cap is bad enough but the uncentred emitter is pretty awful. That's not acceptable really. Tenacity. Over a period of time if necessary. You :poke:Neo.
I really like the form factor of this light (like cross between a baton, an olympic torch, and a cylinder head - the finning) plus the idea of the ui (apart from the 2s wait to change it from momentary to fully-on).
It's a pity that production quality issues are still plaguing it. Especially since Neo now has 300 or so in stock (according to his CPF signature yesterday) - probably all at fairly variable quality.
In spite of all the bad press this presale has been getting I still really wanted one, but until it's no longer a quality lottery, I can't in good conscience put down 185 green ones plus delivery on one. :shakehead
evenchaos
05-20-2009, 07:15 PM
Three freshly charged 18650s (4.19, 4.19, 4.18V)=12.57V draw a current of 0.859 A at the tail - seems awfully low :confused: => (3.3V * 3.4A)/0.92 = 12.1957W, 12.1957W/12.57V=0.97A
Neo, did you mix up my light with someone else? Please respond ASAP.
Ryanrpm
05-20-2009, 08:48 PM
OK, all of you who have the L2....we need some review threads over at CPF proper pronto!!:poke::poke::popcorn::popcorn::naughty:
evenchaos
05-20-2009, 09:14 PM
Alright! Who's got my tail-cap ?!
...
Where is my #1:sick:
There! The unexpected "22", and laughable "NOIGEL" :whoopin:
neoseikan
05-21-2009, 07:08 AM
Hi, people. Happy to see you get the Legion II, but sorry for the stupid tailcap and the bad finish. OK. Premium version is the last time I do these works myself. The standard version is a different story. The workshop will do machining and HA, and I will assemble them asap. I borrowed some funds from my family to produce more standard Legion II, so that I can pay what I own you all. Please mail me southriver@gmail.com
BTW, evenchaos, sorry! Your angry is caused by a lot of mistakes:
Lost the right tailcap for you.
Send the wrong one to you. It should be ideaholic's. Sorry to you two!
Could you swap the light? And I will pay for the shipping. It's a 3.4A Legion II.
BTW, evenchaos, sorry! Your angry is caused by a lot of mistakes:
Lost the right tailcap for you.
Send the wrong one to you. It should be ideaholic's. Sorry to you two!
Could you swap the light? And I will pay for the shipping. It's a 3.4A Legion II.
Do I understand you correctly - ideaholic has my 3.4A light? (or am I measuring it incorrectly?)
